Filter By:
- Parts & Accessories (19)
- Wheels (14)
- Hubs (1)
- Rims (2)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Wheels
If you need just one wheel for on-the-spot repairs, this wheel features both rim brake and disc brake compatibility.
Arch S2 wheelsets have the versatility to handle a wide range of riding conditions and are the ideal upgrade for Trail, AM, Enduro, and eBikes. When your average ride includes both tough climbs and rough descents and you want the best tubeless system in the business, the Arch S2 is for you.
- Versatile 28mm internal rim width optimized for 2.2-2.5" tires
- 6061 aluminum with sleeved joint and stainless steel rim eyelets
- Patented BST low-profile rim shape for easy tubeless inflation and the most reliable seal
- Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability
- E-sync hubs feature Enduro bearings with double-row freehub bearing and cromoly axle offer 47% increase in max torque capacity over Neo hubs
- Connection program includes 3-year E-sync hub warranty, a 3-year S2 rim warranty, a 1-year crash replacement, and $10 donation to trail maintenance or advocacy group of your choice
- Tubeless tape installed requires additional valve stems
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season.
- When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out.
- The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability.
- No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Rear Hub Driveshell Conversion with Twin bearings for easy repair or replacement.
- Designed to fit MTN hubs
The FR 541 may not be your first rim, but it aspires to be the last. The new rim shape improves the impact resistance, enabling you to push a little harder on the trails. It also enhances the pinch flat protection for a trusty ride on rougher tracks.
Build this rim with care and it will reward you with resistance and lightness for a long-lasting bond.
- Aluminum welded construction, hooked tubeless design
- PHR – Pro Head Reinforcement system increases the load-bearing surface of the nipples on the rim and reduces localized stresses
- Provides a 17% increase in pinch flat resistance compared to the previous FR 560 rim
- Disc brake only
The buyer's choice for wheel builders looking to save weight.
The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use.
- Weight: starting at 20g for 64 nipples
Taking the notion of combining flagship performance with workhorse dependability one step further, we're introducing the Terra C. This shares the same hub and spoke architecture as the Terra CL, ensuring ease of service and spoke replacement, should the need arise and is paired with an entirely new rim layup. The rims on the Terra C share the same dimensions and broad range of tire mounting possibilities as the Terra CLX and CL—33mm deep with a 25mm internal width—but are crafted using a new-to-us process known as Resin Transfer Molding. This is an automated process that allows us to very precisely control how resin is introduced to the layup, which in turn ensures maximum strength and material performance. The end result is an incredibly tough set of wheels that you can beat on to hell and back.
- Rim: Terra C RTM Carbon Clincher, 700c, Disc Brake, Tubeless Compatible
- Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width; ERD 577mm
- Hub: DT Swiss 370 J-bend Center Lock, Ratchet LN 18t internals (20 degs), 100x12mm & 142x12mm, Shim. Rd. 11sp Freehub (Convertible freehub )
- Bearing Type: DT Swiss Sealed Steel Cartridge Bearings
- Spokes: DT Swiss Competition Race J-bend, Front: Radial/Two-cross 24 count, R: 268mm, L: 279mm; Rear: Two-cross 24 count, DS: 277mm NDS: 278mm
- Nipple: DT Swiss Hex Prolock Al 2.0x14mm
- Tire Size: 28mm - 47mm; Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi
- Weight: Wheelset 1,610g, Front 719g, Rear 891g (including tubeless rim tape and tubeless valve)
- Assembly Method: Carbon Layup - Automated, Wheel Build - Hand built.
- Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit
- System Weight Limit: 275lbs / 125kg
From the purist gravel racer to the mixed-surface fanatic, Terra CLX II provides a level of weight savings and material confidence that’s unheard of in the all-road or gravel space. This tier of weight-savings translates to rocket-like acceleration off the starting line, nimble performance in the hills, and unleashed efficiency on those loaded-down long-haul excursions.
Weighing in at just 1250 grams, the Roval Terra CLX II are the lightest wheels in their class, rivaling pure climbing wheels in terms of weight and out-performing in raw toughness. We were able to get even lighter than before (50 grams lighter) by utilizing Low Flange Disc (LFD) hubs, borrowed from the Alpinist CLX II wheels.
What’s being carried forward from the previous generation, is the rim. With its multiple Unbound victories, we we kept what was already class leading, and extended our lead. Because Terra CLX II is a hooked rim, you’re able to ride almost any tire and pressure. Thanks to the 25mm internal width, they work seamlessly with 28-47c tires (up to 80 PSI), giving you options to customize your setup for what’s ahead. Using Roval LFD hubs, still spinning on DT Swiss 180 hub internals, Terra CLX II continues to provide flawless ride quality. The CINC ceramic bearings inside do some serious heavy lifting when it comes to the efficiency of these wheels.
Even with laundry list of demands that need to be met for the serious gravel racer, to the all-road explorer—the Roval Terra CLX II checks every box with authority.
- Rim: Terra CLX Carbon Clincher, 700c, Disc Brake, Tubeless Compatible
- Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width - ERD 577mm
- Hub: Roval Light Hub (LF13/LF14R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub
- Bearing Type: DT Swiss SINC Ceramic Bearings
- Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 21 count, DS: 278mm, NDS: 290mm, Rear: One-cross/Two-cross (2:1), DS: 290mm NDS: 288mm
- Nipple: DT Swiss Hex Prolock Al 2.0x14mm
- Tire Size: 28mm - 47mm - Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi
- Weight: Wheelset 1,250g, Front 570g, Rear 680g (excludes 15g, tubeless rim tape and tubeless valve)
- Assembly Method: Hand built at every step, from rim layup to the last nipple turn.
- Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg
The Traverse Alloy rim geometry is optimized for strength, crafted with our most durable alloy, and laced to DT 350 hubs with stout Sapim spokes and Sapim alloy nipples. What does it all add up to? A wheelset that hits harder, holds up longer, and inspires you to go bigger and farther than any other trail wheel out there.
ENGINEERED RIM
The engineered rim shape emphasizes the durability and strength of alloy; creating our most durable alloy wheel we have ever made.
6013 ALLOY
New 6013 alloy material finished with shot peening for impact strength and fatigue strength.
OFFSET ADVANTAGE
Engineered rim offset enables balanced spoke tension for improved fatigue life to keep you rolling.
RIDE QUALITY
Ride quality and impact targets derived from our factory enduro team riders.
INTERNAL RIM
30mm internal rim width optimizes tire shape for the best traction.
ENGINEERED SHAPE
Engineered bead shape ensures the bead bends inward for air pressure /tire retention under impact, so you can always finish your ride.
WEIGHT
1900g (with valve and tape).
SPOKE COUNT F/R
28H Front and Rear
HUB
DT 350 Star Ratchet
HUB ENGAGEMENT
36 Teeth / 10 Degrees
INTERNALLY CANTED
Internally canted bead shape ensures the bead bends
inward for air pressure /tire retention under impact.
INTENDED USE
Trail, Park, Enduro
WEIGHT (29)
1,904g (with valve and tape)
WHEEL SIZES
29 (F/R) 27.5 (R)
FOR LIFE
Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase.
2 YEAR
If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered.
STRUCTURAL WEIGHT LIMIT
(Rider & Cargo) - 125kg / 275lbs
Dynaplug tubeless tire repair plugs are constructed from viscoelastic rubber impregnated cord.
The plugs are specially designed to be inserted directly into a puncture after object has been removed.
- Combo pack includes x5 replacement plugs:
x3 pointed brass soft nose tip plugs
x2 Megaplugs
- Made in USA
- The Megaplugs are compatible with: Megapill tool, Megaplugger tool, and the Racer series of tools
- The brass soft nose tip are compatible with all Dynaplug tools, except for Air Road tool
NOTE: for Air Road plugs, please use part # 380-2020
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels.
- 14mm x 1mm (1411-AN) sold in pairs
- All others sold individually
The Roval Control World Cup wheelset is the fastest in the world, and at just 998 grams, they’re also the lightest. Every detail was obsessively engineered with input from top pros to deliver unmatched performance at the highest level. Beyond its featherweight design, it boasts leading flat resistance, durability, and ride quality, proven by our Factory Team. The Roval Control World Cup isn’t just a wheelset; it’s a new benchmark in XC racing.
- Use - XC racing & riding Weight - 998g (w/ valves and rim tape)
- Recommended Tires - Fast Trak & Air Trak
- Internal Width- 28.5mm
- Hubs - Roval LF DT180 EXP
- Bearings - Sinc Ceramic
- Spokes - Roval Carbon w/ Ti Ends
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.
- End Cap Included
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims.
21mm width fits:
- ZTR Olympic
- ZTR Iron Cross
- ZTR 355
- ZTR Alpine
- ZTR Crest
- ZTR Alpha 340 (2 layers)
- ZTR Alpha 400 (2 layers)
- Most road clincher rims
25mm width fits:
- ZTR 355 (26", 650b, 29")
- ZTR Crest
- Crest MK3
- ZTR Arch EX
- ZTR Flow EX
- Crest S1
27mm width fits:
- ZTR Flow EX
- ZTR Bravo
- ZTR Hugo 52mm
- Arch S1
- ZTR Rapid 28
- ZTR Rapid 30
- Arch MK3
30mm width fits:
- ZTR Flow MK3
Sta Tru Front Wheel
- Single Wall rim
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 27.5"
- ISO Diameter: 584 / 650b / 27.5"
- Front Axle: QR x 100mm
- Tire Type: Clincher
Stainless spoke nipple flat washers from Whisky.
- .3mm Thickness
The Roval Control World Cup wheelset is the fastest in the world, and at just 998 grams, they’re also the lightest. Every detail was obsessively engineered with input from top pros to deliver unmatched performance at the highest level. Beyond its featherweight design, it boasts leading flat resistance, durability, and ride quality, proven by our Factory Team. The Roval Control World Cup isn’t just a wheelset; it’s a new benchmark in XC racing.
- Use - XC racing & riding Weight - 998g (w/ valves and rim tape)
- Recommended Tires - Fast Trak & Air Trak
- Internal Width- 28.5mm
- Hubs - Roval LF DT180 EXP
- Bearings - Sinc Ceramic
- Spokes - Roval Carbon w/ Ti Ends
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
Conquer mountains, flatten hills, and feel your bike come alive with this ultra-light, 1365 gram wheelset. Mass is the enemy of performance, and the Alpinist CL is the lightest wheelset in its class. Weight has been pared to the absolute minimum to make the make the most of every watt and deliver incredible responsiveness without sacrificing any of the strength, ride quality, or durability that are crucial to long-term performance and satisfaction.
- Assembly Method: Hand-built
- Braking Surface: Disc brake only
- Extras: Roval padded wheelbag. NoFault crash replacement policy. Lifetime warranty
- Front Hub: Roval AeroFlange Disc, Center Lock, Sealed Cartridge bearings
- Nipple Type: DT Swiss Pro Lock hexagonal
- Rim Depth: 33mm
- Rim Material: Carbon
- Rim Type: Carbon, clincher (tube-type)
- Rim Width: 21mm internal
- Spoke Count: 21
- Spoke Pattern: Radial/Two-cross (2:1)
- Spoke Type: DT Swiss Aerolite T-head
- Weight: 562g
The Rear Wheel Cover is a critical safety component for carrying passengers on the Globe Haul ST. The easy-to-install guards cover openings on the frame and rear rack to prevent fingers, toes, and clothes from getting too close to the moving wheel and chain. They also protect from dust and grease to keep riders and bikes cleaner.
**For Globe Haul ST bike customers: Use of compatible (1) footrests (pegs), (2) passenger seat, (3) passenger handlebar, and (4) rear wheel cover required to safely carry passengers. All items available separately. **
- Compatible with Haul ST.
- Includes two upper fender covers and two lower wheel covers.
- Easy toolless installation.
Following directly in the tire tracks of the Terra CLX, the new Terra CL utilizes the same super-light, incredibly tough rim as our flagship wheel. It's a hook-bead, 33mm deep carbon fiber rim with a 25mm inner width that plays well with tubeless setup and allows you to mount tires anywhere from 28mm to 47mm wide at whatever pressure you feel like running. In a nod to accessibility, durability and real-world serviceability, we opted to use ultra-dependable DT Swiss 350 hubs and lace them to the rims with DT Swiss Competition Straightpull spokes. The net effect of these changes is a wheelset that is almost as light as our incredibly light Terra CLX, offering close to the same benchmark performance but with more easily sourced spokes in the event of some back-of-beyond carnage, all with a price tag that is about half that of our flagship product.
- Rim: Terra CLX Carbon Clincher, 700c, Disc Brake, Tubeless Compatible
- Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width; ERD 577mm
- Hub: DT Swiss 350 Straight-pull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. Rd. 11sp Freehub (Convertible freehub )
- Bearing Type: DT Swiss Sealed Steel Cartridge Bearings
- Spokes: DT Swiss Competition Race Straightpull, Front: Two-cross (1:1) 24 count, R: 287mm, L: 286mm; Rear: Two-cross (1:1) 24 count, DS: 284mm NDS: 287mm
- Nipple: DT Swiss Hex Prolock Al 2.0x14mm
- Tire Size: 28mm - 47mm; Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi
- Weight: Wheelset 1,408g, Front 654g, Rear 754g (including tubeless rim tape and tubeless valve)
- Assembly Method: Hand built at every step; from rim layup to the last nipple turn.
- Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit
- System Weight Limit: 275lbs / 125kg
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant.
Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads:
- MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi
- ERD 615, 622x49.9, 29 in x 52.3mm
Your rim has a stepped valve and is not compatible with this Schrader valve.
Compatible with straight valve hole Hugo 52 rims and designed to fit 7.5 - 8.5mm valve holes. Sold as a pair.
Identifying your Hugo rim and selecting the correct valve stem:
Stepped Hugo rims have a larger diameter valve hole on the interior of the rim, and a narrower hole on outside of the rim.
Quick tip: don't remove your tire if you don't have to. If your Hugo rim decal reads:
MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi
ERD 615, 622x49.9, 29 in x 52.3mm
Your rim has a stepped valve and is not compatible with this valve. For "Stepped" valve hole Hugo use part AS0105 - Valve Stem pair, Schrader, 32mm, 14mm base.
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
The buyer's choice for wheel builders looking to save weight.
ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond.
- 32 nipples weigh approximately 30 grams
Dynaplug tubeless tire repair plugs are constructed from viscoelastic rubber impregnated cord and non-abrasive brass tip. The plugs are specially designed to be inserted directly into a puncture after object has been removed.
- Pack of 5 replacement plugs with pointed brass soft nose tip
- Compatible with all Dynaplug repair tools, except for Air Road tool
- Made in USA
SURVIVAL OF THE STRONGEST
More Than the Strongest Carbon Wheelset In Our Known Universe, Traverse HDs deliver unbeatable control and pinch-flat resistance in severe terrain, unlocking progression in the bike park, on a trail ride, or on an Enduro World Series track.
STRONG LIKE BULL (NO BULL)
Our strongest off-set rim shape molded with optimized carbon fibers for front and rear specific characteristics, add up to our strongest carbon trail wheels we have ever made.
SMOOTH AND STRONG
Front layup delivers a smooth, control-enhancing ride, while the rear optimizes stiffness & impact strength.
HIGH PRECISION HANDLING
The fusion of control and durability; where stiffness meets grip, HD glues you to your line and snaps you to the next with precision and speed.
SAYONARA PINCH FLATS
Optimized "Flat Top" bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites."
AIR TIME
Thank our genius engineer, Chuck Teixeira, for inventing the the "AirChuck;" a valve that threads directly into the rim eliminating compression nuts, air loss from rim flex, makes tire set-up easier, and reduces sealant clogs.
INTENDED USE
Aggressive Trail, Park, Enduro
WEIGHT (29): 1,706g 240 EXP (with valve and tape)
WHEEL SIZES
29 (F/R) 27.5 (R)
FOR LIFE
Lifetime warranty on Roval Wheels when registered
within the first 90 days of purchase.
2 YEAR "It Happens" No Fault Crash Replacement - If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered.
STRUCTURAL WEIGHT LIMIT
(Rider & Cargo) - 125kg / 275lbs
SURVIVAL OF THE STRONGEST
More Than the Strongest Carbon Wheelset In Our Known Universe, Traverse HDs deliver unbeatable control and pinch-flat resistance in severe terrain, unlocking progression in the bike park, on a trail ride, or on an Enduro World Series track.
STRONG LIKE BULL (NO BULL)
Our strongest off-set rim shape molded with optimized carbon fibers for front and rear specific characteristics, add up to our strongest carbon trail wheels we have ever made.
SMOOTH AND STRONG
Front layup delivers a smooth, control-enhancing ride, while the rear optimizes stiffness & impact strength.
HIGH PRECISION HANDLING
The fusion of control and durability; where stiffness meets grip, HD glues you to your line and snaps you to the next with precision and speed.
SAYONARA PINCH FLATS
Optimized "Flat Top" bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites."
AIR TIME
Thank our genius engineer, Chuck Teixeira, for inventing the the "AirChuck;" a valve that threads directly into the rim eliminating compression nuts, air loss from rim flex, makes tire set-up easier, and reduces sealant clogs.
INTENDED USE
Aggressive Trail, Park, Enduro
WEIGHT (29): 1,706g 240 EXP (with valve and tape)
WHEEL SIZES
29 (F/R) 27.5 (R)
FOR LIFE
Lifetime warranty on Roval Wheels when registered
within the first 90 days of purchase.
2 YEAR "It Happens" No Fault Crash Replacement - If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered.
STRUCTURAL WEIGHT LIMIT
(Rider & Cargo) - 125kg / 275lbs
Page 1 of 2
Next page