Filter By:
- Bottom Brackets (26)
- Brakes/Levers/Pads (51)
- Cables (24)
- Cassettes/Freewheels (22)
- Chainrings (26)
- Chains (35)
- Cranksets (8)
- Derailleurs (24)
- Show More Categories
- Forks (4)
- Groups (4)
- Handlebar Grips/Tape (27)
- Handlebars (18)
- Headsets (10)
- Pedals (22)
- Saddles (16)
- Seatposts (7)
- Shift/Brake Combinations (3)
- Shifters (11)
- Shocks (1)
- Stems (11)
- Other (114)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts

Stop hose or housing runs from rattling in open-type frame stops with these wedge type fittings.
- Snap into open-type frame braze-on housing guides
- Work as reducers to keep housing or hose in place

Jagwire's Lined End Caps are nice ferrules designed for the ends of brake cable housing sections. They feature a small nylon extension on the end that helps reduce friction and adds protection for coated cables, too. You get a bottle of 50 for all your bicycle setup needs.

The SRAM Force eTap AXS front derailleur is AXS enabled for easy personalization. The redesigned derailleur offers better rear-tire clearance—for those that explore all roads—and works perfectly with all chainring combinations. No compromises; never miss a shift.
- AXS enabled for easy personalization
- Elegant and streamlined form for more rear-tire clearance
- SRAM Yaw trimless cage technology with an optimized cage profile for new chainring combinations
- Compatible with existing eTap batteries

Hooded end caps offer the greatest level of protection against contamination and are ideal for high contamination environments.
- Rubber seal for areas that need the most protection
- Alloy body

TruVativ Trushift V7 Chainring
- Trushift middle and outer rings (32T, 36T, and 44T) feature shift ramps and pins
- Ring Position/Type: Middle
- Drivetrain Speeds: 8, 9, 10, 11
- Material: Aluminum

Hooded end caps offer the greatest level of protection against contamination and are ideal for high contamination environments.
- Rubber seal for areas that need the most protection
- Alloy body

MisMatch 1.2 adaptors allow users to mount a SRAM MatchMaker shifter to a Shimano I-Spec-II brake lever clamp.
- Installation hardware included
- Anodized black
- Sold each

The AXS battery cover is a light-weight cowling designed to protect the battery while installed on the derailleur. The AXS Battery Cover fits all AXS mountain bike derailleurs.

- MODEL NO: CS-HG41-7
- SERIES: SHIMANO
- Combination: 11-13-15-18-21-24-28T (ac)
- Combination name(Group name): 11-28T (ac)
- Compatible chain: IG/HG
- Speeds: 7-speed
- Type: HG

Shimano's 105 Rear Brake Caliper utilizes Shimano's Super SLR pivot for excellent braking. The brake is made of light, durable cold-forged aluminum and boasts Shimano's compact construction, which minimizes flex for fast response, uniform pressure and top-notch stopping power in all conditions. Plus, this fine stopper has an adjustment barrel and centering screws for easy fine-tuning, as well as a quick release and wheel guides for easy wheel removal and replacement.

- 3-spline steel cogs for use with Sturmey 3-speed (and 5-speed) internal gear rear hubs
- Flat or dished for tuning chainline. Xylan coating for greater durability

Clamp allows use of a braze-on derailleur on frames without the braze-on tab. Includes a tab to use SRAM's lightweight and easy-to-adjust chain control device.
- Fits all SRAM road braze-on front derailleurs
- ChainSpotter not included

Expand your choice of cranks for use in BB86/BB92/BB91/BB71-41/BB107 frames. Replace your bottom bracket with these dual-row flanged bearings and run 30mm spindle cranks (FSA BB386EVO, Rotor 3d+, RaceFace Next SL, e.thirteen) cranks in your frame. These bearings fit directly in frames with 41mm ID smooth bore bottom bracket shells.You must use 30mm spindle cranksets with spindle lengths longer than 104mm. - Bearings: Enduro Dual-Row ABEC-3 - Dimensions: 41mm x 30mm (42mm flange OD) - Color: silver - Bottom Bracket/Frame Interface: BB86, BB92, BB91, BB71-41, BB107/104 - Bottom Bracket Shell Width (mm): 86.5mm - 107mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: BB386EVO, BB30 longer than 104mm - Crank Spindle Diameter: 30mm - Weight: 89g

- 12-speed compatible
- Quiet, efficient performance and superior durability
- 5.25mm width
- Nickel outer plated finish, Black inner plated finish
- 250 grams (116 Links)

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance.

Shimano's Rapidfire Plus Deore XT shift lever delivers light and responsive front shifting for improved control out on the trail.
- Shift both up and down with a single lever
- Instantaneous push and pull movements
- Light and responsive front shifting improves efficiency, control, and concentration
- Lightweight and compact design boosts enjoyment on and off the trail
- Includes cable

Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction.
- Perfect match with Descendant handlebars
- 3D forged 7075
- CNC machined for weight reduction
- Four bolt handlebar clamp
- Two bolt steerer clamp

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: EC44/40/H12/K
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 44.00mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 65g

Problem Solvers' 11-speed Freehub Spacer converts your 11-speed freehub body to accept a 10-speed casssette. Use this spacer if you are running a 10-speed drivetrain on a new set of wheels with a 11-speed freehub body. The spacer is 1.85mmm thick.

- SLX/105 chain 11-speed chain
- Sil-Tec surface treatment on roller plates only
- Weight: 257g
- Now with quick link
- Refer to Documents and links to find the right product

These 6mm long bolts are designed for single chainrings that have non-threaded standoffs. Uses a double hex head interface so you don't have to use a chainring nut spanner.
- 6mm length
- Made in the US out of 7075-T6 Aluminum
- Has hex heads on both the bolt and nut for easy installation
- Max torque of 7-8 Nm with light grease on threads only

The Shimano BL-MT200 Hydraulic Disc Brake Lever and BR-MT200 Disc Brake Caliper
- Brakes are pre-bled
- Hydraulic hose included
- Rotor not included

The SRAM Universal Derailleur Hanger (UDH) consolidates thousands of hanger options across the industry, while protecting your derailleur against chain jams by pivoting back and out of the way, and slipping slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains.
- The Universal Derailleur Hanger consolidates thousands of mountain bike derailleur standards
- UDH is designed to rotate rearward in the event of impact, and features the ability to “re-rail” the chain back onto the small cog
- It works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace

Compatible with most Shimano drivetrains, microSHIFT thumb tap shifters have durable bodies with ergonomic shift levers that make it easy to get bikes going again.
- Include shift cables
- Visible gear indicator

TRP’s two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Two-piece is now combined with TRP’s new slotted rotor design now with a 2.3mm thickness for DHR and E-MTB only. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions.